The revolver = 4 locks and 1 core
This oversized cylinder is built to lock up with new row of top secrurity pins on every 1/4 turn.
Pinning configuration starts with standard pins at 12 o'clock (marked with small arrow) and then moves clockwise
to spool sarreted and finally Mushroom pins. The end result is a lock that gets progressively harder to pick open.
The security pin positions a pinned from the keyway standard, security, standard, securiy, standard.
But maybe hard is not your thing...why suffer...we get it...life is hard already. Perhaps some guy on the internet said lockpicking
was a fun easy hobby. Well you're in luck as each pin is held in place with a hex nut.
Included with THE REVOLVER are all the part you need to remove some pins and make this an easier lock to pick open.
we also have included security pins and drilled THE REVOLVER to accept 6 pins for those of you who like to be humbled.
And by humbled we mean to say "GET READY TO CRY IN FRONT OF THE MIRROR !"
THE REVOLVER will accept pins from our Reload set, the Check pins and the Master key set
The secrurity pin positions are pinned from the keyway standard, securiy, standard, security, standard.
The 6th pin position is empty for both top and bottom picks.
THE REVOLVER lock and a tin with some shiny stuff